MyCell Alien SX4 VPro Flash File MT6
MyCell Alien SX4 VPro Flash File MT6 ===== https://bytlly.com/2tB1LS
How to Download and Install Mycell Alien SX4 Vpro Flash File MT6
If you are looking for a way to upgrade or downgrade your Mycell Alien SX4 Vpro smartphone, then you have come to the right place. In this article, I will show you how to download and install the flash file for your device using a simple and easy method.
The flash file is also known as the stock firmware or ROM. It is the official software that runs on your device and controls its functions. By flashing the stock firmware, you can restore your device to its original state and fix any software issues, such as bootloop, IMEI problem, or dead issue.
Before you proceed, make sure you have a backup of your important data, as flashing will erase everything on your device. You also need a Windows PC, a USB cable, and some tools and drivers that I will mention later.
Ready Let's get started!
Step 1: Download the Flash File
The first thing you need to do is download the flash file for your Mycell Alien SX4 Vpro device. You can get it from the link below:
Mycell Alien SX4 Vpro Flash File MT6
The file name is Mycell_Alien_SX4_Vpro_MT6580_V2.34_26052019_7.1.zip. It is a zip file that contains the firmware and some other files that you will need later.
Once you have downloaded the file, extract it to a folder on your PC using any zip extractor tool.
Step 2: Install the Drivers and Tools
The next step is to install the drivers and tools that are required for flashing your device. You will need the following:
MTK USB Driver: This is the driver that allows your PC to recognize your device when connected via USB. You can download it from here.
SP Flash Tool: This is the tool that allows you to flash the firmware on your device. You can download it from here.
Scatter File: This is a text file that tells the SP Flash Tool how to partition and format your device. You can find it in the folder where you extracted the flash file. It has a name like MT6580_Android_scatter.txt.
Once you have downloaded and installed the MTK USB Driver and SP Flash Tool, open the SP Flash Tool folder and run flash_tool.exe as administrator.
Step 3: Flash the Firmware
The final step is to flash the firmware on your device using the SP Flash Tool. Follow these steps carefully:
On the SP Flash Tool window, click on Choose under Scatter-loading File and select the scatter file from the folder where you extracted the flash file.
The SP Flash Tool will load all the files from the scatter file and show them on the screen. Make sure all of them are checked.
Click on Download at the top of the SP Flash Tool window.
Turn off your device and remove the battery if possible.
Connect your device to your PC via USB cable while holding down the volume down button.
The SP Flash Tool will detect your device and start flashing the firmware. You will see a progress bar at the bottom of the screen.
Wait until you see a green circle with a check mark at the end of the progress bar. This means that flashing is complete.
Disconnect your device from your PC and put back the battery if you removed it.
Turn on your device and enjoy!
Congratulations! You have successfully flashed your Mycell Alien SX4 Vpro device with MT6 flash file. I hope this article was 061ffe29dd