How to Fix Your We L7 Phone with Flash File Firmware
If you have a We L7 phone that has a dead LCD screen or other software issues, you may be able to revive it with flash file firmware. Flash file firmware is a type of software that can overwrite the existing system on your phone and restore it to its original state. This can help you solve problems like bootloop, hang on logo, virus infection, or corrupted system.
However, flashing your phone is not without risks. You may lose your data, void your warranty, or even brick your phone if you do not follow the instructions carefully. Therefore, you should only flash your phone if you know what you are doing and have a backup of your important files.
In this article, we will show you how to flash your We L7 phone with flash file firmware that is compatible with all versions of the phone. This firmware is also known as care file because it can fix most of the common issues on your phone. You will need a computer, a USB cable, and some tools to perform this process.
Step 1: Download and Extract the Flash File Firmware
The first step is to download the flash file firmware for your We L7 phone from the link below. This file is in zip format and contains the firmware files and the flash tool that you will need to flash your phone.
Download We L7 Flash File Firmware All Ver Care File
After downloading the file, you need to extract it to a folder on your computer. You can use any zip extractor software like WinRAR or 7-Zip to do this. Make sure you remember the location of the extracted folder as you will need it later.
Step 2: Install the Drivers and Run the Flash Tool
The next step is to install the drivers for your We L7 phone on your computer. These drivers will allow your computer to recognize your phone and communicate with it. You can find the drivers in the extracted folder under the Drivers subfolder. Double-click on the driver installer file and follow the instructions to install the drivers.
After installing the drivers, you need to run the flash tool that will flash your phone. You can find the flash tool in the extracted folder under the Flash Tool subfolder. Double-click on the flash tool executable file and wait for it to launch.
Step 3: Load the Firmware Files and Connect Your Phone
The third step is to load the firmware files that you want to flash on your phone. On the flash tool interface, you will see several options and buttons. You need to click on the Scatter-loading button and browse to the extracted folder. There, you will find a file named MT6580_Android_scatter.txt. Select this file and click Open.
This will load all the firmware files on the flash tool. You can check or uncheck any file that you want or do not want to flash on your phone. For example, if you only want to flash the system file, you can uncheck all other files except system.img.
After loading the firmware files, you need to connect your phone to your computer using a USB cable. Make sure your phone is switched off and has enough battery charge. Once you connect your phone, the flash tool will detect it and show a COM port number at the bottom of the interface.
Step 4: Start Flashing and Wait for Completion
The final step is to start flashing your phone with the firmware files. To do this, you need to click on the Download button on the flash tool interface. This will initiate the flashing process and show a progress bar at the bottom of the interface.
You need to wait patiently until the flashing process is completed. Do not disconnect your phone or interrupt the process as this may cause damage to your phone. The flashing process may take several minutes depending on the size of the firmware files and the speed of your computer.
When the flashing process is completed, you will see a green circle with a check mark on the flash tool interface. This means that your phone has been successfully flashed with the firmware files. You can now disconnect your phone from your computer and switch it on.